Ozonator Unit

Ozonator for Bottled and Mineral Water Treament and Disinfection

Ozone is used in a variety of drinking or potable water treatment applications including the treatment of bottled water. In fact, ozone water treatment is the most frequently used disinfection process in water bottling today. It has proven to be a safe and effective method of producing high quality water. Aquazone's Ozonator equipment is well suited for bottled water applications and has been used in a number of such facilities. Ozone disinfect the water, the bottling equipment, the bottle, the air above the water and the sealed cap of the bottle. Other benefits of ozone water treatment in bottling include improved taste, elimination of odor, and improved shelf life. In addition, since ozone decomposes into oxygen, once it has treated the water it leaves no unpleasant odor or taste in the water as some other disinfectant can.

An effective ozone water treatment process needs to have a good ozone contact system. This system must efficiently transfer the ozone gas into the water and then provide a sufficient contact time for ozone to react with the micro organisms and chemicals in the water. The mixing of ozone with water ozone is usually done with an ejector or venturi. These systems can achieve transfer efficiencies of 85-95%. The system should allow enough time for the ozone to act on the constituents of the water to insure proper disinfection and removal of unwanted chemicals. The amount of ozone required is determined by the ozone demand of the water. Any constituent that can be oxidized by ozone will consume ozone must be satisfied while leaving an excess residual.

The excess residual will insure that all pathogens have been inactivated if sufficient contact time has been provided. Typically, testing is needed to define the ozone demand of specific water. Besides the specific constituents of the water, other factors impact ozone demand. These include: pH, temperature, filler design, operating procedures, etc. Process control for ozonation will focus on the proper dosage of ozone into the water to achieve the necessary residual without adding excess ozone to the water. A typical configuration will involve a contact tank with a recirculation loop. Ozone is injected into the recirculation loop and the tank provides the proper contact time for the reaction of the ozone with the water. The system will have a level control and vent. The vent will allow excess ozone gas released from the water to pass into an ozone destroyer (decomposer). The decomposer prevents excess ozone from entering the atmosphere of the bottling plant.

Ultra pure water for pharmaceutical industries.

Ultra pure water for electronic industries.

Mineral and bottled drinking water industries.

Swimming pool & spa water treatment.

Cooling tower water treatment.

Effluent treatment.

Municipal water treatment.

Also it is used to purify air in Pharmaceutical Industries, Hotels, Health Clubs and also to clean Carpets, Draperies, and Upholstery.